Arcade Machine Parts Compatibility Guide | Hiclawcrane

Arcade Machine Parts Compatibility Guide

Direct Answer: Check the exact machine, mainboard and replacement part before ordering. A matching gantry size or connector shape alone does not establish compatibility. Compare mounting dimensions, electrical ratings, connector pinouts and control interfaces. For Hiclawcrane enquiries, send the machine and mainboard model, original part label, connector photos and measurements so we can help check the proposed replacement.


Gantry Size Compatibility

The gantry is the XYZ movement system inside the machine. It determines the maximum prize size the machine can hold.

Gantry Size Machine Type Max Prize Size
25.7cm Mini / tabletop Up to 3cm
53cm Standard commercial Up to 20cm
71cm Large commercial Up to 35cm

Claw Compatibility

Claws are interchangeable — the right claw size depends on your prize size, not the gantry. Claws come in multiple connector types depending on the brand and model of your machine. Always check your existing claw connector before ordering a replacement.

Prize Size Recommended Claw
Up to 3cm (capsule toys, small candy) 3-finger small claw
5–15cm (blind boxes, small plush) 3-finger medium claw
15–35cm (large plush, premium prizes) 3-finger large claw
  • Claw strength (grip force) is adjustable via the mainboard settings, independent of claw size
  • If unsure about connector compatibility, contact us with a photo of your existing claw connector

Mainboard Compatibility

  • Confirm the exact Hiclawcrane mainboard model and kit edition against the installed gantry, motors, claw and sensors. A 53cm or 71cm size designation alone does not confirm a board match.
  • Do not assume a 25.7cm Mini mainboard can be substituted into a 53cm or 71cm system. Confirm the specific board, motor and claw ratings, wiring and required setup before considering a substitution.
  • The power supply's 110V or 220V AC input setting is not the mainboard's supply-voltage specification. Check the mainboard's required supply against its label and wiring diagram; do not connect mains AC directly to a board on the basis of the machine's mains rating.
  • When replacing another brand's mainboard, verify electrical ratings, connector pin assignments, motor and claw control, limit switches, sensors and payment interfaces. Matching plug shapes do not prove compatibility.

Coin Acceptor Compatibility

  • All Hiclawcrane machines use standard pulse-output coin acceptors.
  • Compatible with most universal coin acceptors (CH-926, HX-616, and equivalents).
  • Accepts coins from $0.25 to $2.00 depending on configuration.
  • Multi-coin acceptors can be programmed for different denominations.

Bill Acceptor Compatibility

  • Standard pulse-output bill acceptors are compatible with Hiclawcrane mainboards.
  • Requires a free power connector and signal wire from the mainboard.
  • If unsure about compatibility, contact us before purchasing.

Power Supply Compatibility

  • Select the power supply for the exact mainboard and connected components. Do not assume a 5V/12V arcade supply can replace a multi-output claw-machine supply; check every required output voltage, polarity, terminal assignment and load.
  • Confirm the required current capacity and total load from the actual board, motors, claw and other connected components. Gantry size alone is not enough to specify a 12V current requirement.
  • For the Hiclawcrane 350W multi-output power supply, AC input is 110V or 220V, manually selected using a DIP switch. Before shipment, we normally preset the switch for the destination country's mains voltage. Verify that the setting matches your local supply before connecting power.

Frequently Asked Questions

Are Hiclawcrane parts compatible with other brand machines?

Compatibility must be checked for the specific machine and part. Compare mounting dimensions, voltage and current ratings, connector pinouts and control interfaces; gantry size or matching plugs alone do not establish fit. Send photos of the original part label, mainboard and connections, plus measurements, for help checking a replacement before ordering.

How do I know which gantry size my machine uses?

Measure the width of the XYZ movement rail inside the prize compartment. Standard sizes are 25.7cm, 53cm, and 71cm.

How do I choose the right claw size?

Choose based on your prize size. Small claws for capsule toys and items under 3cm, medium claws for blind boxes and small plush (5–15cm), large claws for big plush and premium prizes (15–35cm). Claws can be swapped on most gantry arms.

Can I upgrade my coin acceptor to accept bills?

Yes — add a pulse-output bill acceptor to the existing wiring. Most Hiclawcrane mainboards have a dedicated bill acceptor input port.


Related Resources