Arcade Claw Machine Voltage Conversion Guide – 110V vs 220V
Arcade Claw Machine Voltage Guide: 110V vs 220V
Arcade claw machines are designed for global operation. Most current claw machine power supply units include a DIP switch (指拨开关) that lets you quickly select between 110V and 220V — no external transformer or rewiring required. A small number of machines ship with a universal wide-voltage PSU (100–240V) that requires no adjustment at all.
This guide explains how to identify your PSU type and configure it correctly for your local voltage standard before first use.
Voltage Standards by Region
| Region | Standard Voltage | Frequency |
|---|---|---|
| North America (US, Canada, Mexico) | 110–120V | 60Hz |
| Europe | 220–240V | 50Hz |
| Asia (China) | 220V | 50Hz |
| Japan | 100V | 50/60Hz |
| Australia / NZ | 220–240V | 50Hz |
| South America | 110–220V (varies by country) | 50/60Hz |
Type 1: DIP Switch PSU (Standard Configuration)
The majority of claw machines — including all standard Hiclawcrane models — use a switching power supply with a built-in DIP switch (指拨开关). This allows fast, tool-free voltage selection between 110V and 220V. It is a reliable and convenient solution for global deployment.
How to set the DIP switch:
- Unplug the machine completely before touching the switch
- Locate the DIP switch on the PSU — typically on the side or rear, labeled 110V / 220V
- Flip the switch to match your local voltage standard
- Verify the setting, then plug in and power on
✅ Simple, fast, and no additional hardware needed. Set once before installation and you’re done.
⚠️ Warning: Always unplug the machine before adjusting the DIP switch. Setting it incorrectly (e.g., 220V switch on a 110V outlet) will cause the machine to not power on. Reversing it (110V switch into a 220V outlet) may damage the PSU.
Type 2: Universal Wide-Voltage PSU
Some machines ship with a universal switching PSU labeled “100–240V~ 50/60Hz”. These require no adjustment — simply plug in and operate. You can confirm this by checking the input voltage label on the PSU unit.
✅ No DIP switch. No setup. Works globally out of the box.
How to Identify Your PSU Type
- “110V / 220V” with a DIP switch → Standard selectable PSU. Set the switch before first use.
- “100–240V~” → Universal wide-voltage PSU. No action needed.
- “220V~” or “110V~” (single fixed value, no switch) → Fixed-voltage PSU. Contact Hiclawcrane for a replacement if your voltage doesn’t match.
Common Mistakes
| Mistake | Consequence | Fix |
|---|---|---|
| Not checking DIP switch before first power-on | Machine doesn’t turn on, or PSU damage | Always verify switch position matches local voltage |
| Adjusting DIP switch while plugged in | Electric shock or short circuit | Always unplug first |
| Assuming all machines are wide-voltage | Wrong switch setting on DIP-switch PSU | Check PSU label before installation |
| Ignoring frequency (50Hz vs 60Hz) | Minor motor speed variation on some models | Most PSUs handle both; verify label if unsure |
Frequently Asked Questions
Do I need an external transformer for my Hiclawcrane machine in the US?
No. Standard Hiclawcrane machines use a DIP-switch PSU. Simply flip the switch to 110V before plugging in. No external transformer is required.
Where is the DIP switch located?
On the power supply unit (PSU) inside the cabinet, typically on the side or rear panel of the PSU. It is labeled 110V / 220V.
My machine won’t power on in the US — what should I check?
First check the DIP switch on the PSU. If it is set to 220V and your outlet is 110V, unplug the machine, flip the switch to 110V, and power on again.
Can I change the DIP switch setting after installation?
Yes, at any time — as long as the machine is unplugged. The DIP switch is designed for easy adjustment in the field.